Garage exhaust fumes are hazardous because they contain toxic compounds like carbon monoxide. This is why the installation of an auto exhaust hose for the garage is essential. The need for exhaust garage hoses differs according to the application and operational parameters. This post offers tips for selecting an auto exhaust hose for the garage. It focuses on different factors that need to be considered while buying exhaust hoses for garages.
Factors to Consider While Selecting Exhaust Hoses for Garages
Considering the following factors can help in the selection of appropriate garage exhaust hoses.
- Temperature Tolerance: Temperature is one of the most important considerations for exhaust hose selection. Automobile exhaust fumes be anywhere from 300F to over 1200F, and these high-temperature fumes can potentially crack, melt or even burn the hose. Therefore, the temperature tolerance of exhaust hoses for garages must be your starting point. For any project requiring the service of a diesel vehicle during its regeneration cycle there are many special considerations, and you should reach out to us directly to discuss your needs. Getting that type of system wrong can have significant consequences.
- Hose Material
- Hose Size: The hose size impacts flow rate, but bigger isn’t always better. For out-the-door applications, you need to make sure that the hose can fit through a door port while being large enough for the application requirements. For overhead systems you need to connect to a TEE or saddle and may need to adapter to ensure proper fit. It is also important to consider how much pull your fan system provides to make sure the hose diameter and length doesn’t unbalance your system.
- Operational Parameters :Various operational parameters like environmental conditions, exposure to moisture, oil, chemicals, etc. must be considered. The hose should be flexible both in terms of the ability to bend but also to resist cracking due to bend frequency.
: Exhaust hoses can be made from various materials, including EPDM rubber, fiberglass, neoprene, silicone, or a combination of them. Each material has pros and cons because they vary in cost, temperature rating, durability, and flexibility.